How to locate laser head

How to locate laser head

Correct the material and use one edge of the material and the direct gap of the tool to find the correct material. Fix the material after correction. Then proceed to the next work, determine the origin of the material. X direction and Y direction determination is the same method, here we only say X direction. First, the tool is slowly close to the left side of the material by fine tuning, and the tool is gently rotated until the tool has just touched the material, and then the left side of the X workpiece at this time is cleared, and then the tool is lifted and moved to the right, which is also the same as the tool has just touched the right side of the material, and the coordinates of the X workpiece at this time can be written down. And then put the general of this value The position is the center of the X direction of the material. The Y direction is the same. Computer engraving machines have laser engraving and mechanical engraving, both of which can be divided into high power and low power. Because the application scope of engraving machine is very wide, it is necessary to understand the most suitable application scope of various engraving machines: 

1, breastplate: low power laser engraving machine (engraving machine), high power or low power computer engraving machine;

 2, building model: large, low power computer engraving machine;

 3, metal (mould, chapter, etc.) processing: large, low power computer engraving machine (high power saves time because of the large amount of cutting each time); 

4. Crystal word making: great work Rate laser engraving machine (above 50W), high-power mechanical engraving machine;

5, wood, organic glass, artificial stone, etc.: high-power mechanical engraving machine;6, display and exhibition model: high-power, large-scale mechanical engraving machine.

CONTACT INFORMATION

Email:sales018@bogongcnc.com